MyIPScan

Independent self-test

VPN Unlimited Leak Test

Three things VPN Unlimited documents change what these checks return. Its own knowledge base states that VPN Unlimited does not yet support IPv6 and recommends disabling IPv6 on your device, so an IPv6 address here belongs to your own connection. DNS is a setting rather than a default: Stop DNS Leak is described in the Windows manual as making all DNS requests go through VPN DNS servers only, and you switch it on in the app. Trusted Networks then works the other way, automatically disabling the VPN connection on networks you have marked as trusted, which is one reason a reading can look unchanged. What follows describes your own session, not KeepSolid's servers.

Read methodology

Live test

Run the test on VPN Unlimited now

VPN Unlimited routes DNS to its own servers only when Stop DNS Leak is switched on, so read the resolver line first. If this network sits on your Trusted Networks list, the app disables the connection by design.

Open the full VPN Leak Test

This browser session

Leak report

Not tested
Verdict
Visible IP
Not tested
DNS
Not tested
WebRTC
Not tested
IPv6
Not tested
Browser
Not tested
Next step

This reports what your browser shows in this session. It does not certify VPN Unlimited, does not test every server, app or device, and does not prove anonymity.

Current-session checks

What this VPN Unlimited self-test checks

Read each signal once before connecting and once after, in the same browser. On VPN Unlimited it is worth confirming which settings are on first, because several of them decide what the readings are able to show.

Before you read the result

What VPN Unlimited documents about these signals

The points below come from VPN Unlimited's own manuals and knowledge base pages. They cover the settings most likely to decide what your own readings show.

IPv6 is not yet supported

VPN Unlimited's own knowledge base states that it does not yet support IPv6 and, to avoid an IP leak, recommends disabling IPv6 on your device. Its Synology setup manual carries the same instruction, recommending you turn IPv6 off before enabling the VPN connection. An IPv6 result taken while connected therefore describes your own connection, and the documented fix lives at the device rather than in the app.

Stop DNS Leak is a switch, not a default

The Windows manual describes Stop DNS Leak in plain terms: turn it on to make all DNS requests go through VPN DNS servers only. That wording places DNS handling under a setting you control rather than something the app is documented to apply on its own. If the resolver named in your reading is not the one you expected, that toggle is where VPN Unlimited's own documentation points first.

Kill Switch defaults differ by platform

VPN Unlimited documents the Kill Switch as instantly turning off your internet connection if it detects any disruptions or failures of a VPN connection, and lists it for Windows, macOS, iOS and Android 8.0 Oreo and higher. It states that the feature is enabled by default on iOS and on the macOS App Store version, while on Windows you enable it in Settings and on Android you turn on Always-on VPN and Block connections without VPN. Which platform you are reading this on therefore decides whether it is a setting to confirm.

Trusted Networks turns the VPN off on purpose

Trusted Networks lets you mark networks you treat as trusted, and VPN Unlimited documents the result plainly: the VPN connection will be automatically disabled while on the trusted internet connections. On the Windows standalone app only WiFi networks can be added, not LAN. If you are testing at home on a network you once added to that list, an unchanged address is the feature working rather than a fault.

A Personal Static IP changes what a lookup returns

VPN Unlimited sells a Personal Static IP as a unique address in a country you select that will be used only by you, contrasting it with shared servers where many subscribers reside on the same server and share one address. Deployment is documented as taking up to 72 hours, with an email once it is ready. If you have one, your exit address stays the same between sessions, so an address or ASN lookup returns a steadier answer than a shared server address would.

Between the readings

Record a kill-switch drop on VPN Unlimited

VPN Unlimited documents its Kill Switch as instantly turning off your internet connection if it detects any disruptions or failures of a VPN connection, and states that it is enabled by default on iOS and on the macOS App Store version. On Windows and Android it is enabled manually, which makes the length of the gap worth recording.

Known leak issues and fixes

How VPN Unlimited stands against the VPN leak attacks published since 2023, and leak bugs the provider disclosed itself, taken from its own statements and changelogs. Every row links to its source and says when we last read it. Compare every provider side by side.

AttackAppsStatusWhat the provider saidSource
TunnelVisionCVE-2024-3661 All apps Not statedChecked 5 Dec 2024 KeepSolid ships a 'Tunnel Vision Checker' that detects and alerts when traffic bypasses the tunnel (blog dated 5 Dec 2024). The post does not name CVE-2024-3661 or DHCP option 121, does not claim to block the attack, and does not list platforms. No TunnelCrack statement was found. vpnunlimited.com blogRead 21 Oct 2026
TunnelCrack LocalNetCVE-2023-36672, CVE-2023-35838 All apps Not statedChecked 18 Oct 2026 No KeepSolid statement found on vpnunlimited.com or its blog. vpnunlimited.com blogRead 18 Oct 2026
TunnelCrack ServerIPCVE-2023-36673, CVE-2023-36671 All apps Not statedChecked 18 Oct 2026 No KeepSolid statement found on vpnunlimited.com or its blog. vpnunlimited.com blogRead 18 Oct 2026
Windows Kill Switch let P2P clients leak the real IP Windows FixedStated 3 Oct 2022Fix: the Windows Kill Switch update of October 2022 Firewall rules rebuilt so P2P clients that bind to any interface cannot reach the internet outside the tunnel. The Kill Switch is off by default. vpnunlimited.com blogRead 18 Oct 2026

These are the provider's published statements, not tests we ran. The leak test on this page checks your own connection; these attacks need a hostile local network and cannot be reproduced from a web page.

Published audits

No published independent audit found as of 21 Oct 2026. The no-log page says 'proven no-logs policy' and 'regular audits' but names no auditor and links no report. Also checked the KeepSolid privacy policy, about page and history page: no independent audit is listed. The 2018 VerSprite finding (see incident) was independent vulnerability research, not a commissioned audit. vpnunlimited.comChecked 21 Oct 2026 All published VPN audits we track.

Incidents on record

Security incidents and legal cases involving VPN Unlimited, from its own statements or a primary document. Incidents across providers.

DateWhat happenedProvider’s responseSource
3 Feb 2026 CVE-2020-37101: VPN Unlimited 6.1 for Windows installs its service under an unquoted path, allowing local privilege escalation. Found in 2020; NVD published it in February 2026. Not stated NVDRead 21 Oct 2026
16 Mar 2018 CVE-2018-8739: the macOS client's privileged helper let any local app run commands as root. NVD names version 4.2.0; VerSprite's advisory VS-2018-014 says versions before 4.2.0. The VerSprite advisory records the vendor response as 'VPN Unlimited team is reviewing.' NVDRead 21 Oct 2026

Who runs VPN Unlimited, and on what

Company
KeepSolid Inc., United States. Registered address: 347 5th Ave, Suite 1402-419, New York, NY 10016. The company history (https://www.keepsolid.com/history) says 'Established in 2013' and 'Most of KeepSolid's employees live in Ukraine'. No parent company is named on keepsolid.com. keepsolid.comRead 21 Oct 2026

Who owns which VPN: every provider’s company and the groups that run several brands.

What this cannot prove

  • This checks visible browser/session signals only.
  • This does not certify the provider.
  • This does not test every server, app, device, or connection.
  • This does not prove anonymity.
  • This does not prove every security condition.
  • A clean result does not prove every leak is absent.

How to compare before and after on VPN Unlimited

  1. Before connecting, note the visible address, the resolver that answered, and whether the IPv6 check returned anything.
  2. Open the app and check three settings first: Kill Switch, Stop DNS Leak, and whether this network sits on your Trusted Networks list.
  3. Connect, then rerun the same checks in the same browser.
  4. Expect the address to change, and the resolver too once Stop DNS Leak is on. An IPv6 address that persists points at the device, since VPN Unlimited says it does not yet support IPv6.
Safe Copy limits

Safe Copy exports use safe summary categories and remove raw IP, exact city, full user-agent, raw fingerprint data, raw resolver IPs and WebRTC candidates. It is not a certificate, provider audit, or proof of anonymity.

FAQ

VPN Unlimited leak test FAQ

Does VPN Unlimited support IPv6?

Its own knowledge base states that VPN Unlimited does not yet support IPv6 and recommends disabling IPv6 on your device to avoid an IP leak. The Synology setup manual repeats that recommendation before you enable the VPN connection.

My DNS check names a resolver I did not expect. What does the app control?

VPN Unlimited documents a Stop DNS Leak setting, described in its Windows manual as making all DNS requests go through VPN DNS servers only. It is a switch inside the app, so confirming its state is where the documentation points.

Is the Kill Switch on by default?

It depends on the platform. VPN Unlimited states that the Kill Switch is enabled by default on iOS and on the macOS App Store version, while on Windows and Android it is enabled manually. It is listed for Android 8.0 Oreo and higher.

Why does the VPN switch itself off on my home network?

That is Trusted Networks. VPN Unlimited documents the feature as automatically disabling the VPN connection while on the trusted internet connections you have added. On the Windows standalone app only WiFi networks can be added, not LAN.

I have a Personal Static IP. Does that change these readings?

It changes what an address lookup returns. VPN Unlimited describes a Personal Static IP as a unique address in a country you select, used only by you rather than shared with other subscribers, and says deployment may take up to 72 hours.

Can this page confirm that KeepSolid keeps no logs?

No. KeepSolid states that it does not monitor, store or log your online activity and that it removes your IP address after your session ends. That concerns what the company retains on its side, which no browser check can observe.